How To Program GE Universal Remote Without Code?

How To Program GE Universal Remote Without Code

Before digging into the details of the topic, let’s first see what “GE” stands for. The term “GE” is the short form of general electric. It provides a wide range of universal remote control. These remote controls are liked and used by a lot of people because of their compatibility. 

GE universal remotes are compatible with over 1000 devices of different companies and brands. Folks, their compatibility is not limited to television only. These GE remotes are also compatible with satellite boxes, DVD players, Blu-ray, streaming players, soundbars, and even more. 

In addition to this, the GE universal remote can control 3 to 8 devices at a time (however, it depends on the variant of your GE universal remote control).

Step-by-Step Guide: How To Program GE Universal Remote Without Code?

Programming a GE universal remote is a bit challenging without a code. This is because it involves searching for a specific code to pair your remote with the device. 

However, there exist some methods to program your universal remote to configure with your device without inputting codes. 

Try the following set of easy steps to program your GE universal remote control.

Step 1: Turn On The Power Of The Device 

First, you need to turn on the device you wish to control with the remote control. 

Step 2: ‘Step up’ Button

Now, you need to press and hold the ‘ setup’ button until you see a red LED light on the remote control. 

Step 3: Press the Relevant Button

Carefully observe your remote controller. You will find separate buttons to program every kind of device. So at this stage, you need to press the relevant button to contact your device with the remote.

For instance, if you want to connect your TV with the remote control then press a button which says ‘TV’. If you want to configure Blu-ray or any other device, press the relevant button. 

Step 4: Press ‘Power’ Button

Now, you must press the power button repeatedly until your device shuts down. 

Note: This may require some time because the remote control cycles through a wide range of codes. 

Step 5: ‘Ok’ Button 

Once your device shuts down you need to press the ‘Enter’ or ‘OK’ button on the remote to save the code. 

How to Program GE Universal Remote by Using the Number Search Method?

How-to-Program-GE-Universal-Remote-by-using-the-number-search-method
How-to-Program-GE-Universal-Remote-by-using-the-number-search-method

Step 1: First you need to turn your device on. You also need to keep your GE remote near the device you expect to configure/ program.

Step 2: Now you have to continuously press and hold the ‘Setup’ button on the GE universal remote.

Note: Hold the ‘Setup’ button until you see a small LED light turn ON on the remote. 

Step 3: Now, press the component button.

Step 4: After pressing the component button, you have to press the three-digit code. (Code:9-9-1). In the next step, you need to press and hold the Channel button and power button and wait until the device turns OFF.

Step 5: Then in the next step, press the ‘Enter’ button to save the code.

Step 6: Finally, press the ‘Power’ button again to save the code in the database.

How to Auto-program a GE Universal Remote?

How to auto-program a GE Universal remote
How to auto-program a GE Universal remote

You can use a method known as an auto program to program your GE universal remote without a code. With the help of this method, you can scan all the codes in the database of your remote and find a suitable match for your device.

Follow the steps given below to auto-program a GE universal remote. 

Step 1: Turn on the power of the device you want to connect with your remote. 

Step 2: Next press and hold the button that says ‘setup’ and wait until you see a blinking LED light on the remote. 

Step 3: Now, you need to press the device button on the GE universal remote. For instance, if you want to program the remote for the DVD player then press the relevant button, and if you want to operate the TV then press the ‘TV’ button. 

See, one can program a remote easily without the codes.

Troubleshooting Remote Problems

If you are unable to program the GE universal remote you can make sure the following conditions are followed. The following points will help you troubleshoot remote problems.

  1. If the remote fails to respond then replace your batteries. Low batteries sometimes contribute to resistance in programming a device.
  2.  Make sure there is no physical obstacles/ hindrance between the remote and the device(s) you want to connect. For instance, walls, decorations, and large pieces of furniture can stop the remote from connecting with your devices.
  3. You need to keep in mind that the remote may not control or operate all aspects of a device. For instance, you may be able to use the GE universal remote to turn on your device, but you may fail to increase or decrease the volume of the device. Under such cases, you can use other remotes which have advanced features.

FAQs

Q1: How To Program A Universal Remote To A  TV Without Codes, GE?

Ans: Follow these steps:

  1. Turn on your Television.
  2. Press and hold the ‘setup’ key and wait until red LED turns on. 
  3. Then hit the ‘TV’ button. 
  4. For next few seconds keep pressing the power button until TV shuts down. 
  5. Now turn on your TV.
  6. Next you need to hit ‘VOLUME UP’ key after every 3 seconds and wait until the TV shuts down.
  7. Press the ‘TV’ key to save the code in the database of the remote.
  8. Now, you can turn on your TV to operate your device.

Q2: How To Program A GE Universal Remote To A Vizio TV Without Codes?

Ans: You can easily program a GE universal remote to operate Vizio TV without inputting codes. 

First, you have to power on your Vizio TV. Press and hold the set up key until you see red light blinking. Now, press the ‘TV’ button. Then press and hold the power button after every five seconds and wait until your TV shuts down. 

Again turn on the TV. 

Now press the Volume up button after every 3 seconds until TV shuts down. Now hit the ‘TV’ button to save the code. 

Q3: How to program a GE universal remote without codes to DVD player?

Ans: To program a GE universal remote with your DVD player without code, you have to press and hold the ‘setup’ button on the GE remote and wait until you see the red light on. This light shows that your remote is ready to program. 

After this, select your device on the remote. In the case of DVD player, you need to select the DVD key on the remote control.

Q4: How do I find my GE universal remote code?

Ans: You can find codes in the codebook of GE Remote Control. This Codebook is available online or you can also get it from a local GE retailer. After getting the code of the required device follow these instructions: 

Press and hold the button that says “Setup” button and wait until the TV button blinks two times. Now, you have to enter the code from the code finder into your GE remote control.

Final Wording

To sum up, yes one can program GE universal remote without codes with the help of an auto code search method. Once your GE universal remote starts scanning for code it automatically configures the correct one.

The above guide works for various devices and brands including ONN TV, Firestick, Element TV, LG TV, Samsung TV, Roku TV, Magnavox and many other devices. If you stick to the steps of the guide correctly, you can effortlessly program your remote within a minute.  

I hope the above content was useful for you to configure or program your GE universal remote without using a code. If you still have some confusion or questions, feel free to ask in the chat window section regarding problems pairing the remote. 

Explore Further:

Leave a Reply

Your email address will not be published. Required fields are marked *